Clay Bars
Thumbnail 1 Thumbnail 2 Thumbnail 3 Thumbnail 4
ITEM: Chemical Guys Poly Clay Bar Medium Duty 209g
Product Info

Why Buy This Product?

- Easily and safely remove stubborn contaminates

- Perfect for use on light to medium oxidation

- Safe on any type of paint finish, glass, fiberglass and metal

- Perfect for use prior to buffing or waxing

About the Medium Duty Clay Bar
The Medium Duty Poly Clay Bar is used to easily and safely remove stubborn contaminates that will not be removed during the normal washing process. Stubborn surface damaging contaminates such as tar, tree sap, bird droppings, bug smear, embedded road grime, paint over-spray and industrial fallout can leave surfaces rough and gritty. This medium duty clay bar is great for use prior to buffing and waxing. Poly clay pulls our all the things you cannot see but you can definitely feel. Though they may not be visible, they feel rough and gritty and may cause patches of paint to appear dull even after waxing. As these contaminates oxidize, they create rust spots within the paint. Once this happens, the oxidation is considerably harder to remove and will most likely take a good bit of paint with it. 

How To Use:

1. Wash vehicle very well to loosen surface dirt.  Getting the surface as clean as possible will reduce wear on the clay bar and extend the life of your clay bar by reducing the amount of contaminants that need to be lifted by the bar.

2. Mist a 2 x2 square foot area generously with Chemical Guys Luber Lubricant. Hold the clay bar against the surface and move it back and forth.

3. The clay bar will grab the surface initially. This grabbing indicates that the clay is encountering contamination. Continue rubbing gently until the clay glides freely.

4. Using Luber, wipe each complete section with a micro fiber towel, this process will wipe away contaminates and reduce friction and possible marring of surface through friction.

5. Before moving to the next section, inspect the clay. If it appears soiled, fold the clay and use a clean portion to clean the next section. If you drop the clay or it becomes completely soiled, discard the clay bar and continue with a fresh bar

6. Wipe any left over residue away with a clean microfiber towel.

7. Once you have clayed the paint, YOU CAN CLAY THE WINDOWS AS WELL. Follow the same directions for windows this will reduce streaking when using your wipers and accelerate water runoff when it rains.

8. Wash Vehicle again once completed, this will assure that all contaminates that were removed are safely washed off of the surface where they can no longer stick hard to the paint.

Copyright © 2013 Contempo Concept Limited All Rights Reserved
Home | Auto Detailing | Car Care Products | Car Storage System | Contact Us | Policy | Privacy Policy